korider.com | Hyosung Motorcycle Owners Forum

korider.com | Hyosung Motorcycle Owners Forum

  • December 16, 2018, 03:08:18 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search

News:

Welcome to Korider.com!

Pages: [1]

Author Topic: Hyosung GT250R 2010 Error number C23  (Read 1523 times)

Cafe58

  • Training Wheels
  • *
  • Offline Offline
  • Posts: 24
Hyosung GT250R 2010 Error number C23
« on: September 06, 2012, 07:36:25 PM »

Hi all bikers!

I have a problem with my Hyosung GT250R 2010 (9000km)

Engine shuts down while I'm driving and when standing in the neutral position.

When you come below 4000 rpm engine turns off by itself.

On the instrument panel flash FI.

I contact authorized HYOSUNG service, but my service does not have a special tool for the diagnostics :)

Pressure fuel pump is ok.
The voltage regulator is changed.

Please help me. What could be the problem?

P.S. Sorry for my bad English  :-\
« Last Edit: September 09, 2012, 05:03:22 PM by Vele »
Logged

Register and log in and the Ads below will be gone! :D


Cafe58

  • Training Wheels
  • *
  • Offline Offline
  • Posts: 24
Re: Hyosung GT250R 2010 FI PROBLEMS
« Reply #1 on: September 07, 2012, 07:03:54 PM »

I found the topic but it is very old

http://korider.com/index.php?topic=19219.10 

Please tell me does if something could be happen with my bike because this is the only way to get to the error code.

Which wire is used? copper or ...?

Please, help!
Logged

nerveshock

  • Knight Rider
  • Learner rider
  • **
  • Offline Offline
  • Posts: 45
Re: Hyosung GT250R 2010 FI PROBLEMS
« Reply #2 on: September 07, 2012, 07:38:08 PM »

Are you asking what type of wire you can use? Because you can use whatever scrap wire you have laying around even a metal paper clip if that's all you have.
Logged
Flat Black 2008 GT250R
Flat Black headlight bezel
Re-jetted 22.5vm/F97.5mb/R100mb
Shimmed jet needles
De-snorkeled stock air filter
AIS block off

Cafe58

  • Training Wheels
  • *
  • Offline Offline
  • Posts: 24
Hyosung GT250R 2010 Error number C23
« Reply #3 on: September 08, 2012, 06:45:21 PM »

 Giving me error number C23 which is the Rollover Sensor
 If someone can help me to solve the error?

« Last Edit: September 09, 2012, 05:05:39 PM by Vele »
Logged

Pages: [1]